Bitcoind – Commands, RPC Protocol, Install Server ...

Aeon

Aeon (AEON) is a private, secure, untraceable currency. You are your bank, you control your funds, and nobody can trace your transfers.
[link]

Monero GUI stuck in sync loop

Hi everyone,
I have been using Monero GUI with no hassle until today I converted some bitcoins to XMR via Changelly and noticed my funds did not update despite recieving confirmation that the transaction has been made.
I quit out of it and reopened and now Monero GUI is stuck in a loop where Daemon is synchronised and the wallet blocks will then sync until the blocks count down to zero and then demon will sync again and the process has been repeating for a couple of hours.
It wouldn't sync initially it would get stuck so I rebooted then disabled windows defender then I ran into this new looping problem
I'm using: Windows 10 V0.16.0.3
Any help would be much appreciated thanks
submitted by LemonScaping to monerosupport [link] [comments]

how to access local full node from other machine...

In an effort to learn about and support the neetwork, I have setup a full node running bitcoin core on a dedicated linux box. It's been running smoothly for about a month after the blockchain dl and I smile a little every time I login to check logs and diskspace and all the little sysadmin tasks.
I would like to run a wallet gui client on my daily box that accesses the bitcoin box in a client/server sort of way.
Can bitcoin core do this? If not, is there a wallet (windows) that will provide a full gui while using the bitcoin core daemon running on my linux box?
submitted by TopherBrowne to Bitcoin [link] [comments]

Hice nmap en imss.gob.mx. Esta mas abierto que el OXXO. Ni siquiera funciona el SSL es una burla

PLS no me baneen

Aqui para los curiosos


Starting Nmap 7.60 ( https://nmap.org ) at 2020-09-01 03:06 CDT
Nmap scan report for imss.gob.mx (45.223.23.206)
Host is up (0.060s latency).
Other addresses for imss.gob.mx (not scanned): 45.223.17.206
Not shown: 740 filtered ports
PORT STATE SERVICE
53/tcp open domain
80/tcp open http
81/tcp open hosts2-ns
82/tcp open xfer
83/tcp open mit-ml-dev
84/tcp open ctf
85/tcp open mit-ml-dev
88/tcp open kerberos-sec
89/tcp open su-mit-tg
90/tcp open dnsix
99/tcp open metagram
389/tcp open ldap
443/tcp open https
444/tcp open snpp
445/tcp open microsoft-ds
500/tcp open isakmp
554/tcp open rtsp
555/tcp open dsf
587/tcp open submission
631/tcp open ipp
636/tcp open ldapssl
777/tcp open multiling-http
800/tcp open mdbs_daemon
801/tcp open device
843/tcp open unknown
880/tcp open unknown
888/tcp open accessbuilder
990/tcp open ftps
995/tcp open pop3s
999/tcp open garcon
1000/tcp open cadlock
1002/tcp open windows-icfw
1024/tcp open kdm
1025/tcp open NFS-or-IIS
1028/tcp open unknown
1080/tcp open socks
1111/tcp open lmsocialserver
1234/tcp open hotline
1433/tcp open ms-sql-s
1443/tcp open ies-lm
1455/tcp open esl-lm
1494/tcp open citrix-ica
1521/tcp open oracle
1935/tcp open rtmp
1971/tcp open netop-school
1972/tcp open intersys-cache
1974/tcp open drp
1984/tcp open bigbrother
2000/tcp open cisco-sccp
2001/tcp open dc
2006/tcp open invokator
2020/tcp open xinupageserver
2022/tcp open down
2048/tcp open dls-monitor
2049/tcp open nfs
2065/tcp open dlsrpn
2068/tcp open avocentkvm
2100/tcp open amiganetfs
2200/tcp open ici
2222/tcp open EtherNetIP-1
2557/tcp open nicetec-mgmt
3000/tcp open ppp
3001/tcp open nessus
3003/tcp open cgms
3005/tcp open deslogin
3006/tcp open deslogind
3007/tcp open lotusmtap
3011/tcp open trusted-web
3013/tcp open gilatskysurfer
3017/tcp open event_listener
3030/tcp open arepa-cas
3052/tcp open powerchute
3071/tcp open csd-mgmt-port
3077/tcp open orbix-loc-ssl
3306/tcp open mysql
3333/tcp open dec-notes
3389/tcp open ms-wbt-server
3404/tcp open unknown
3551/tcp open apcupsd
3580/tcp open nati-svrloc
4000/tcp open remoteanything
4001/tcp open newoak
4002/tcp open mlchat-proxy
4343/tcp open unicall
4443/tcp open pharos
4444/tcp open krb524
4445/tcp open upnotifyp
4449/tcp open privatewire
4848/tcp open appserv-http
5000/tcp open upnp
5001/tcp open commplex-link
5002/tcp open rfe
5003/tcp open filemaker
5004/tcp open avt-profile-1
5009/tcp open airport-admin
5050/tcp open mmcc
5051/tcp open ida-agent
5060/tcp open sip
5061/tcp open sip-tls
5080/tcp open onscreen
5100/tcp open admd
5120/tcp open barracuda-bbs
5222/tcp open xmpp-client
5225/tcp open hp-server
5226/tcp open hp-status
5269/tcp open xmpp-server
5280/tcp open xmpp-bosh
5440/tcp open unknown
5500/tcp open hotline
5544/tcp open unknown
5555/tcp open freeciv
5900/tcp open vnc
5901/tcp open vnc-1
5902/tcp open vnc-2
5903/tcp open vnc-3
5904/tcp open unknown
5906/tcp open unknown
5907/tcp open unknown
5910/tcp open cm
5911/tcp open cpdlc
5915/tcp open unknown
5987/tcp open wbem-rmi
5988/tcp open wbem-http
5989/tcp open wbem-https
5998/tcp open ncd-diag
5999/tcp open ncd-conf
6000/tcp open X11
6001/tcp open X11:1
6002/tcp open X11:2
6003/tcp open X11:3
6004/tcp open X11:4
6005/tcp open X11:5
6006/tcp open X11:6
6007/tcp open X11:7
6009/tcp open X11:9
6100/tcp open synchronet-db
6510/tcp open mcer-port
6543/tcp open mythtv
6565/tcp open unknown
6580/tcp open parsec-master
6666/tcp open irc
6699/tcp open napster
6779/tcp open unknown
6789/tcp open ibm-db2-admin
7000/tcp open afs3-fileserver
7001/tcp open afs3-callback
7002/tcp open afs3-prserver
7004/tcp open afs3-kaserver
7007/tcp open afs3-bos
7070/tcp open realserver
7100/tcp open font-service
7443/tcp open oracleas-https
7777/tcp open cbt
7778/tcp open interwise
7999/tcp open irdmi2
8000/tcp open http-alt
8001/tcp open vcom-tunnel
8002/tcp open teradataordbms
8007/tcp open ajp12
8008/tcp open http
8009/tcp open ajp13
8010/tcp open xmpp
8011/tcp open unknown
8021/tcp open ftp-proxy
8022/tcp open oa-system
8031/tcp open unknown
8042/tcp open fs-agent
8045/tcp open unknown
8080/tcp open http-proxy
8081/tcp open blackice-icecap
8082/tcp open blackice-alerts
8083/tcp open us-srv
8084/tcp open unknown
8085/tcp open unknown
8086/tcp open d-s-n
8087/tcp open simplifymedia
8088/tcp open radan-http
8089/tcp open unknown
8090/tcp open opsmessaging
8093/tcp open unknown
8099/tcp open unknown
8100/tcp open xprint-server
8180/tcp open unknown
8181/tcp open intermapper
8192/tcp open sophos
8193/tcp open sophos
8194/tcp open sophos
8200/tcp open trivnet1
8222/tcp open unknown
8300/tcp open tmi
8333/tcp open bitcoin
8383/tcp open m2mservices
8402/tcp open abarsd
8443/tcp open https-alt
8500/tcp open fmtp
8600/tcp open asterix
8701/tcp open unknown
8800/tcp open sunwebadmin
8873/tcp open dxspider
8888/tcp open sun-answerbook
8899/tcp open ospf-lite
9000/tcp open cslistener
9001/tcp open tor-orport
9002/tcp open dynamid
9003/tcp open unknown
9009/tcp open pichat
9010/tcp open sdr
9011/tcp open unknown
9040/tcp open tor-trans
9050/tcp open tor-socks
9071/tcp open unknown
9080/tcp open glrpc
9081/tcp open unknown
9090/tcp open zeus-admin
9091/tcp open xmltec-xmlmail
9099/tcp open unknown
9100/tcp open jetdirect
9101/tcp open jetdirect
9102/tcp open jetdirect
9103/tcp open jetdirect
9110/tcp open unknown
9111/tcp open DragonIDSConsole
9200/tcp open wap-wsp
9207/tcp open wap-vcal-s
9220/tcp open unknown
9500/tcp open ismserver
9943/tcp open unknown
9998/tcp open distinct32
9999/tcp open abyss
10000/tcp open snet-sensor-mgmt
10001/tcp open scp-config
10002/tcp open documentum
10003/tcp open documentum_s
10004/tcp open emcrmirccd
10009/tcp open swdtp-sv
10010/tcp open rxapi
10012/tcp open unknown
10024/tcp open unknown
10025/tcp open unknown
10082/tcp open amandaidx
11110/tcp open sgi-soap
12174/tcp open unknown
12265/tcp open unknown
12345/tcp open netbus
15002/tcp open onep-tls
16000/tcp open fmsas
16001/tcp open fmsascon
16012/tcp open unknown
16016/tcp open unknown
16018/tcp open unknown
16080/tcp open osxwebadmin
18040/tcp open unknown
18101/tcp open unknown
20000/tcp open dnp
30000/tcp open ndmps
31337/tcp open Elite
50000/tcp open ibm-db2
50001/tcp open unknown
55055/tcp open unknown
60443/tcp open unknown

Nmap done: 1 IP address (1 host up) scanned in 3.34 seconds

En serio de milagro nadie les ha hecho nada
submitted by phi_array to mexico [link] [comments]

Cannot create wallet with Trezor

Hi guys, I am stuck trying to create a wallet for my Trezor with Electrum 4.0.4 on Linux:
I get to the point of entering the password twice and then selecting the path. But after that it just says
'Please wait' and then the window hangs. The only way to do something is either kill the process or send a `SIGINT` signal.
Interestingly after sending a SIGINT the window unfreezes and asks me again for the password (also during the whole freeze the Trezor device writes that I should enter my password). After entering the password again I get an empty error window and on closing it everything closes.
I started electrum with `electrum -v` to get some logs:
$ electrum -v I | logging | Electrum version: 4.0.4 - https://electrum.org - https://github.com/spesmilo/electrum I | logging | Python version: 3.8.6 (default, Sep 30 2020, 04:00:38) [GCC 10.2.0]. On platform: Linux-5.8.14-arch1-1-x86_64-with-glibc2.2.5 I | logging | Logging to file: None I | logging | Log filters: verbosity '*', verbosity_shortcuts '' I/p | plugin.Plugins | registering hardware bitbox02: ('hardware', 'bitbox02', 'BitBox02') I/p | plugin.Plugins | registering hardware coldcard: ('hardware', 'coldcard', 'Coldcard Wallet') I/p | plugin.Plugins | registering hardware digitalbitbox: ('hardware', 'digitalbitbox', 'Digital Bitbox wallet') I/p | plugin.Plugins | registering hardware keepkey: ('hardware', 'keepkey', 'KeepKey wallet') I/p | plugin.Plugins | registering hardware ledger: ('hardware', 'ledger', 'Ledger wallet') I/p | plugin.Plugins | registering hardware safe_t: ('hardware', 'safe_t', 'Safe-T mini wallet') I/p | plugin.Plugins | registering hardware trezor: ('hardware', 'trezor', 'Trezor wallet') I/p | plugin.Plugins | registering wallet type ('2fa', 'trustedcoin') D | util.profiler | Plugins.__init__ 0.0044 I/n | network | blockchains [0] I | exchange_rate.FxThread | using exchange CoinGecko D | util.profiler | Daemon.__init__ 0.0023 I/n | network | starting network I | daemon.Daemon | launching GUI: qt I/n | network | setting proxy None I | daemon.Daemon | starting taskgroup. I/n | network | connecting to electrumx.ftp.sh:50002:s as new interface I/n | network | starting taskgroup. I | gui.qt.history_list | could not import electrum.plot. This feature needs matplotlib to be installed. I | gui.qt.ElectrumGui | Qt GUI starting up... Qt=5.15.1, PyQt=5.15.1 I/i | interface.[localhost:50002] | connection established. version: ['ElectrumPersonalServer 0.2.0', '1.4'] D | util.profiler | ElectrumGui.__init__ 0.1374 I/i | interface.[vmd27610.contaboserver.net:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface vmd27610.contaboserver.net:50002:s -- CancelledError() I/i | interface.[electrumx.ftp.sh:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface electrumx.ftp.sh:50002:s -- CancelledError() I/i | interface.[rbx.curalle.ovh:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/i | interface.[2AZZARITA.hopto.org:50006] | connection established. version: ['ElectrumX 1.15.0', '1.4'] I/n | network | couldn't launch iface rbx.curalle.ovh:50002:s -- CancelledError() I/i | interface.[2AZZARITA.hopto.org:50006] | set blockchain with height 653567 I/i | interface.[2AZZARITA.hopto.org:50006] | skipping header 653566 I/n | network | no height for main interface I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50750} I/i | interface.[hsmiths4fyqlw5xw.onion:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface hsmiths4fyqlw5xw.onion:50002:s -- CancelledError() I/n | network | switching to 2AZZARITA.hopto.org:50006:s I/i | interface.[electrum3.hodlister.co:50002] | connection established. version: ['ElectrumX 1.10.0', '1.4'] I/n | network | fee_histogram [[99, 100899], [71, 112316], [61, 132563], [59, 156116], [57, 175394], [54, 114050], [51, 219092], [49, 195934], [48, 565137], [47, 781451], [46, 883591], [45, 259824], [44, 450143], [43, 114488], [42, 22100], [41, 49428], [40, 106542], [38, 151315], [33, 547095], [22, 620244], [13, 648588], [9, 822409], [5, 741398], [3, 1799486], [2, 651429]] I/n | network | fee_histogram [[99, 100899], [71, 112316], [61, 132563], [59, 156116], [57, 175394], [54, 114050], [51, 219092], [49, 195934], [48, 565137], [47, 781451], [46, 883591], [45, 259824], [44, 450143], [43, 114488], [42, 22100], [41, 49428], [40, 106542], [38, 151315], [33, 547095], [22, 620244], [13, 648588], [9, 822409], [5, 741398], [3, 1799486], [2, 651429]] I/i | interface.[bitcoin.corgi.party:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-5, 'No address associated with hostname'))) I/n | network | couldn't launch iface bitcoin.corgi.party:50002:s -- CancelledError() I/i | interface.[electrumx-core.1209k.com:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(OSError(101, 'Network is unreachable'))) I/n | network | couldn't launch iface electrumx-core.1209k.com:50002:s -- CancelledError() I/i | interface.[electrum3.hodlister.co:50002] | set blockchain with height 653567 I/i | interface.[electrum3.hodlister.co:50002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I/i | interface.[hsmiths5mjk6uijs.onion:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface hsmiths5mjk6uijs.onion:50002:s -- CancelledError() I/i | interface.[dxm.no-ip.biz:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(ConnectionRefusedError(111, "Connect call failed ('77.6.34.45', 50002)"))) I/n | network | couldn't launch iface dxm.no-ip.biz:50002:s -- CancelledError() I/i | interface.[electrum2.eff.ro:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface electrum2.eff.ro:50002:s -- CancelledError() I/i | interface.[electrum.hsmiths.com:50002] | disconnecting due to: ConnectError(ConnectionResetError(104, 'Connection reset by peer')) I/n | network | couldn't launch iface electrum.hsmiths.com:50002:s -- CancelledError() I | storage.WalletStorage | wallet path /home/bene/.electrum/wallets/default_wallet I/i | interface.[bitcoin.aranguren.org:50002] | connection established. version: ['ElectrumX 1.15.0', '1.4'] I | storage.WalletStorage | wallet path /home/bene/.electrum/wallets/default_wallet I/i | interface.[bitcoin.aranguren.org:50002] | set blockchain with height 653567 I/i | interface.[bitcoin.aranguren.org:50002] | skipping header 653566 [240/1884] I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I/i | interface.[localhost:50002] | set blockchain with height 653567 I/i | interface.[localhost:50002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48175, 5: 50745, 2: 50749} I/p | plugin.Plugins | loaded bitbox02 I/p | plugin.Plugins | loaded coldcard I/p | plugin.Plugins | loaded digitalbitbox I/p | plugin.Plugins | loaded keepkey I/p | plugin.Plugins | loaded ledger I/p | plugin.Plugins | loaded safe_t I/p | plugin.Plugins | loaded trezor I | plugin.DeviceMgr | scanning devices... D | util.profiler | DeviceMgr.scan_devices 0.0244 W | gui.qt.installwizard.InstallWizard | error getting device infos for bitbox02: Missing libraries for bitbox02. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for coldcard: Missing libraries for coldcard. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for keepkey: Missing libraries for keepkey. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for ledger: Missing libraries for ledger. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for safe_t: Missing libraries for safe_t. // Make sure you install it with python3 I | plugins.trezor.qt.Plugin | connecting to device at webusb:001:3 I | plugins.trezor.qt.Plugin | connected to device at webusb:001:3 I | plugin.DeviceMgr | Registering My TREZOF3342BDD7C90C7F9FBA58136 I | plugin.DeviceMgr | scanning devices... D | util.profiler | DeviceMgr.scan_devices 0.0388 I/i | interface.[localhost:50002] | skipping header 653567 qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4028, resource id: 14687032, major code: 40 (TranslateCoords), minor code: 0 I | plugin.DeviceMgr | scanning devices... D | util.profiler | DeviceMgr.scan_devices 0.0407 
This is the point where the window freezes. Then I precc `Ctrl+C` to send a SIGINT signal and then this is the rest of the logs:
I/n | network | couldn't launch iface technetium.network:50002:s -- TimeoutError() I/n | network | couldn't launch iface e2.keff.org:50002:s -- TimeoutError() I/n | network | couldn't launch iface electrum-server.ninja:50002:s -- TimeoutError() I/n | network | couldn't launch iface xray587.startdedicated.de:50002:s -- TimeoutError() I/n | network | couldn't launch iface electrum.mindspot.org:50002:s -- TimeoutError() I/i | interface.[electrum.leblancnet.us:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface electrum.leblancnet.us:50002:s -- CancelledError() I/i | interface.[ex01.axalgo.com:50002] | succeeded in getting cert I/i | interface.[electrumx.schulzemic.net:50002] | succeeded in getting cert ^CE | gui.qt.installwizard.InstallWizard | Traceback (most recent call last): File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 446, in on_hw_derivation xpub = self.plugin.get_xpub(device_info.device.id_, derivation, xtype, self) File "/uslib/python3.8/site-packages/electrum/plugins/trezotrezor.py", line 315, in get_xpub xpub = client.get_xpub(derivation, xtype) File "/uslib/python3.8/site-packages/electrum/plugin.py", line 362, in wrapper return run_in_hwd_thread(partial(func, *args, **kwargs)) File "/uslib/python3.8/site-packages/electrum/plugin.py", line 355, in run_in_hwd_thread return fut.result() File "/uslib/python3.8/concurrent/futures/_base.py", line 434, in result self._condition.wait(timeout) File "/uslib/python3.8/threading.py", line 302, in wait waiter.acquire() KeyboardInterrupt I/i | interface.[ex01.axalgo.com:50002] | connection established. version: ['ElectrumX 1.14.0', '1.4'] I/i | interface.[electrumx.schulzemic.net:50002] | connection established. version: ['ElectrumX 1.15.0', '1.4'] I/i | interface.[ex01.axalgo.com:50002] | set blockchain with height 653567 I/i | interface.[ex01.axalgo.com:50002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I/i | interface.[electrumx.schulzemic.net:50002] | set blockchain with height 653567 I/i | interface.[electrumx.schulzemic.net:50002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I/n | network | couldn't launch iface dragon085.startdedicated.de:50002:s -- TimeoutError() I/i | interface.[btc.electroncash.dk:60002] | succeeded in getting cert I/i | interface.[mxhwmwa3nt2si4ufszm24whlpkruu74jle27ys2fyjuiifbbrub6thyd.onion:50006] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-2, 'Name or service not known'))) I/n | network | couldn't launch iface mxhwmwa3nt2si4ufszm24whlpkruu74jle27ys2fyjuiifbbrub6thyd.onion:50006:s -- CancelledError() I/i | interface.[electrum2.villocq.com:50002] | disconnecting due to: ErrorGettingSSLCertFromServer(ConnectError(gaierror(-5, 'No address associated with hostname'))) I/n | network | couldn't launch iface electrum2.villocq.com:50002:s -- CancelledError() I/i | interface.[btc.electroncash.dk:60002] | connection established. version: ['ElectrumX 1.15.0', '1.4'] I/i | interface.[btc.electroncash.dk:60002] | set blockchain with height 653567 I/i | interface.[btc.electroncash.dk:60002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I/i | interface.[btc.electrum.bitbitnet.net:50002] | connection established. version: ['ElectrumX 1.15.0', '1.4'] I/i | interface.[btc.electrum.bitbitnet.net:50002] | set blockchain with height 653567 [169/1884] I/i | interface.[btc.electrum.bitbitnet.net:50002] | skipping header 653567 I/n | network | fee_estimates {25: 46526, 10: 48176, 5: 50745, 2: 50749} I | plugin.DeviceMgr | scanning devices... D | util.profiler | DeviceMgr.scan_devices 0.0394 W | gui.qt.installwizard.InstallWizard | error getting device infos for bitbox02: Missing libraries for bitbox02. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for coldcard: Missing libraries for coldcard. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for keepkey: Missing libraries for keepkey. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for ledger: Missing libraries for ledger. // Make sure you install it with python3 W | gui.qt.installwizard.InstallWizard | error getting device infos for safe_t: Missing libraries for safe_t. // Make sure you install it with python3 I/i | interface.[bitcoin.aranguren.org:50002] | skipping header 653567 E | daemon.Daemon | GUI raised exception: ReRunDialog(). shutting down. I | gui.qt.ElectrumGui | closing GUI I | daemon.Daemon | shutting down network I/n | network | stopping network I/n | network | couldn't launch iface electrum.hodlister.co:50002:s -- CancelledError() I/n | network | couldn't launch iface orannis.com:50002:s -- CancelledError() I/i | interface.[localhost:50002] | disconnecting due to: CancelledError() I/i | interface.[electrumx.schulzemic.net:50002] | disconnecting due to: CancelledError() I/i | interface.[ex01.axalgo.com:50002] | disconnecting due to: CancelledError() I/i | interface.[2AZZARITA.hopto.org:50006] | disconnecting due to: CancelledError() I/i | interface.[btc.electroncash.dk:60002] | disconnecting due to: CancelledError() I/i | interface.[electrum3.hodlister.co:50002] | disconnecting due to: CancelledError() I/i | interface.[btc.electrum.bitbitnet.net:50002] | disconnecting due to: CancelledError() I/i | interface.[bitcoin.aranguren.org:50002] | disconnecting due to: CancelledError() I/n | network | taskgroup stopped. I | daemon.Daemon | stopping taskgroup I | daemon.Daemon | taskgroup stopped. I | daemon.Daemon | removing lockfile I | daemon.Daemon | stopped E | __main__ | daemon.run_gui errored Traceback (most recent call last): File "/uslib/python3.8/site-packages/electrum/gui/qt/installwizard.py", line 118, in func_wrapper run_next(*out) File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 193, in on_wallet_type self.run(action) File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 115, in run f(*args, **kwargs) File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 225, in choose_keystore self.choice_dialog(title=title, message=message, choices=choices, run_next=self.run) File "/uslib/python3.8/site-packages/electrum/gui/qt/installwizard.py", line 106, in func_wrapper out = func(*args, **kwargs) File "/uslib/python3.8/site-packages/electrum/gui/qt/installwizard.py", line 594, in choice_dialog self.exec_layout(vbox, title) File "/uslib/python3.8/site-packages/electrum/gui/qt/installwizard.py", line 429, in exec_layout raise GoBack from None electrum.base_wizard.GoBack The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usbin/electrum", line 380, in  d.run_gui(config, plugins) File "/uslib/python3.8/site-packages/electrum/daemon.py", line 566, in run_gui self.gui_object.main() File "/uslib/python3.8/site-packages/electrum/gui/qt/__init__.py", line 363, in main if not self.start_new_window(path, self.config.get('url'), app_is_starting=True): File "/uslib/python3.8/site-packages/electrum/gui/qt/__init__.py", line 247, in wrapper return func(self, *args, **kwargs) File "/uslib/python3.8/site-packages/electrum/gui/qt/__init__.py", line 271, in start_new_window wallet = self._start_wizard_to_select_or_create_wallet(path) File "/uslib/python3.8/site-packages/electrum/gui/qt/__init__.py", line 313, in _start_wizard_to_select_or_create_wallet wizard.run('new') File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 115, in run f(*args, **kwargs) File "/uslib/python3.8/site-packages/electrum/base_wizard.py", line 153, in new self.choice_dialog(title=title, message=message, choices=choices, run_next=self.on_wallet_type) File "/uslib/python3.8/site-packages/electrum/gui/qt/installwizard.py", line 131, in func_wrapper raise ReRunDialog() from e electrum.base_wizard.ReRunDialog I/p | plugin.Plugins | stopped 
submitted by bIacktemplar to Electrum [link] [comments]

Funds never received. What did I do wrong?

Sorry if this is a boring or redundant topic, but I just can't find an answer. This is my first attempt at a Monero transaction.
I downloaded and installed the Monero Windows GUI app. I handled the antivirus issues, and the network is showing as connected, with both Daemon and Wallet synchronized.
I used Changelly to exchange Bitcoin to XMR from a Coinbase account.
The transaction seemed to work smoothly, and Changelly is telling me the funds have been moved successfully.
My Monero wallet does not show any received funds.
When I compare the wallet's primary address and the address listed in the confirmed transaction, the appear identical.
What could have possibly gone wrong? How do I debug this?
submitted by raftguide to monerosupport [link] [comments]

How To Stake/Mine Coinevo

EVO Staking/Evo mining

Evo uses Proof of Stake consensus mechanism, which is different from Bitcoin's PoW (Proof of Work). Evo mining process in PoS system is called staking. The block producer will get 6.5EVO, as well as the transaction fees and gases as block reward. So the real reward is usually more than 6.5 evo in total.
Basic requirements for staking:
  1. Run a Coinevo fullnode, and keep online (Since Coinevo is using PoS, we don't need any mining machine, just PC or even Raspberry Pi can run a fullnode);
  2. Have some EVO in the wallet (fullnode)(Any amount of EVO can be used for staking, more EVO means higher possibility to stake).
If you have no EVO yet, please get some from market before you doing following staking settings.
Currently, Coinevo Core wallet is the only wallet that support Coinevo PoS staking. Note that other wallets like mobile wallet and Evo Electrum are not able to stake for the time being.
Two ways to stake:
Either way works in the same way for staking, so you can choose either method you like.

Method 1:Staking with evod (command line)

1. Run evod

Follow the guidance to run evod :
./evod -daemon 
Staking is default on for evod, so no need for other options if you only want to stake.

2. Send some EVO to your wallet

First you can generate a new address with:
./evo-cli getnewaddress 
This will generate a new address with Prefix '1'. You can send some EVO to this new generated address for staking. You can generate as many addresses as you like, and send arbitrary EVO as you like for staking.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..
After the EVO node syncing to the latest block, you can check current balance with ./evo-cli getbalance or get utxo list with./evo-cli listunspent
Please do following steps after your coin is mature.

3. Check staking info

Check current staking info with:
./evo-cli getstakinginfo 
You might get the result like this:
{ "enabled": true, "staking": true, "errors": "", "currentblocktx": 0, "pooledtx": 0, "difficulty": 3693409.779133397, "search-interval": 1577, "weight": 309584575558555, "netstakeweight": 1948540143266404, "expectedtime": 805 } 
enabled means if your wallet have enabled staking, it should be true by default. staking means if your wallet is currently staking (mining). weight stands for the amount of EVO that is staking right now, with unit 10^-8EVO, here in the example, we have 0.532EVO staking. expectedtime stands for the expected time that you will get a reward, the unit is second.

4. How to stake if the wallet is encrypted?

If your wallet is not encrypted, you can skip this section. However, for security, we recommand you encrypt your wallet.
Coinevo wallet can be encrypted with encryptwallet . However, staking will be stopped when it is encrypted. For example, ./evo-cli getstakinginfo for a encrypted wallet:
{ "enabled": true, "staking": false, "errors": "", "currentblocksize": 1000, "currentblocktx": 0, "pooledtx": 94, "difficulty": 5788429.670171153, "search-interval": 0, "weight": 53206430, "netstakeweight": 2438496688951881, "expectedtime": 0 } 
See staking turns to false , which means wallet is not staking.
You can use walletpassphrase to unlock wallet for staking:
./evo-cli walletpassphrase "" 99999999 true 
After unlocking, you can double check getstakinginfo , it should look the same with previous unlocked result, staking become true.

Method 2: Staking with evo-qt wallet (official PC wallet)

Current supported platform: Mac/Linux/Windows.

1. Open Evo qt wallet

Launch the wallet.

2. Send some EVO to your wallet

If you already have some EVO in your wallet, you might skip this step.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..

3. Check staking status

The flash sign at the bottom of wallet shows staking info :
Solid black flash means it is staking now. For more information, you can put your mouse on the flash, e.g.:
Hollow flash measn it is not staking
Possible reasons for not staking:
No flash sign means staking is disabled

About block reward

The block producer will get more than 6.5 EVO rewards, something to keep in mind:

How to disable staking?

Staking is by default enabled for Coinevo wallet. If you need to disable staking for some reason (for example exchanges are always recommanded to disable staking), you might following anyone of the 3 ways below:
1 Add -staking=false when running Coinevo node:
./evod -staking=false -daemon 
For qt wallet, it is like:
./evo-qt -staking=false 
2 Add config staking=false in evo.conf;
3 Encrypt wallet, since encrypted wallet will automatically stop staking.
submitted by coinevo to u/coinevo [link] [comments]

#Reddcoin ($RDD) Core Wallet Release 3.0.1 - PosV v2 SuperMajority Consensus Upgrade at 45.6% - Required Upgrade

Reddcoin (RDD) Core Wallet v3.0.1 - January 09, 2020
Version 3.0.1 is the official release version of Reddcoin Core. It is available for download at Reddcoin Core's Github repository here: https://github.com/reddcoin-project/reddcoin/releases/tag/v3.0.1
This release features PoSV v2.supermajority activation and new staking ruleset (and minor misc fixes). v3.0.1 is still not yet MacOS Catalina compatible. We are still working and should have that fix issued very soon. Sincere apologies to our Mac-using ReddHeads.
It is particularly important that all users upgrade, as once PoSV v2 is enforced, version 4 blocks will be rejected from the network entirely.
Therefore v3.0.1 is a "strongly recommended" update for all users. Note: If you have already installed v3.0.0, this upgrade is not required. If you have not yet upgraded from v2.0.x or earlier, this is a REQUIRED upgrade. Please install the newest version v3.0.1 to avoid losing functionality during supermajority activation of PoSV v2.
Reddcoin Core version 3.0.1 is now available from: https://github.com/reddcoin-project/reddcoin/releases Release Notes are available here and replicated below in this announcement: https://github.com/reddcoin-project/reddcoin/blob/mastedoc/release-notes.md
This is a new major version release of Reddcoin.
Previously, the original and subsequent versions of Reddcoin were taken from a fork of the Litecoin code base.
With the release of Reddcoin V2.0.0, the code was based directly from a fork of Bitcoin. This allows for better source control and feature implementation from upstream changes into the future
With the release of Reddcoin V3.0.0, the PoSV stake reward has been improved to allow for a target 5% network growth, in process re-incentivizing individual network stakers and providing for integrated dev support.
Upgrading to this release is strongly recommended and required for continued operation. Once a supermajority of 90% is reached, old wallets will no longer accept the new v5 blocks.
Please report bugs using the issue tracker at github:
https://github.com/reddcoin-project/reddcoin/issues
How to Upgrade
If you are running an older version of Reddcoin, shut it down. Wait until it has completely shut down (which may take a few minutes for older versions). Run the installer (on Windows) or just copy over /Applications/Reddcoin-Qt (on Mac) or reddcoind/reddcoin-qt (on Linux).
Start wallet. All done!
Reddcoin v3.0.0 introduced an updated PoSV method to better distribute staking rewards and target a overall 5% network growth. Staking and relay policy enhancements 
To implement PoSV v2, Reddcoin Core's block templates are now for version 5 blocks only. When PoSV v2 consensus (Supermajority 9000/10000) is reached, only v5 blocks will be accepted by the network.This equates to approximately 90% of blocks being generated over 1 week period. Status at any time may be viewed in node debug.log
Blockchain Download:
Blockchain data for both testnet and mainnet along with instructions can be downloaded from github. https://github.com/reddcoin-project/bootstrap_files
3.0.1 changelog
*83e212838 - John Nash, 2020-01-09 : really delete these files *3a1458ecd - Oliver Webb, 2020-01-08 : Added missing dependency libminiupnpc-dev for Jessie *d21915431 - Tiago Peralta, 2019-06-21 : Add vout to listtransactions/gettransaction *8d58ea7cf - Oliver Webb, 2020-01-08 : Script for downloading pre compiled binaries for Raspbian Jessie, Stretch or Buster *d4eced1bc - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_stretch.sh *c5e9f91cf - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_jessie.sh *5d5771b00 - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_buster.sh *75c6ae91b - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *54c501787 - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *acb30a2b6 - Oliver Webb, 2020-01-05 : script files for Raspbian Jessie (also Stakebox) *cfddbe594 - John Nash, 2020-01-05 : Update copyright year and version *e46e5e7de - John Nash, 2020-01-05 : download script for pre compiled wallet *37386790a - John Nash, 2020-01-05 : change libssl deb packages links to github *9dbc772e6 - Oliver Webb, 2020-01-03 : download script for pre compiled wallet *857d697fd - Oliver Webb, 2020-01-03 : change libssl deb packages links to github *2cb74b9a8 - John Nash, 2019-12-31 : update copyright year *c641a1ab3 - Oliver Webb, 2019-12-30 : Raspberry Pi build script files for v3 wallet *a3f21a4a4 - John Nash, 2019-12-30 : add install script for building db4 update instructions for unix, osx, arm building using the db4 install script *5f6299b2a - John Nash, 2019-12-28 : docs: Update build notes for arm processors *465716c01 - John Nash, 2019-12-28 : test for arm devices *3fec3a535 - John Nash, 2018-02-02 : build: update source paths *5f6031ab4 - John Nash, 2019-12-28 : Scrypt n=1024 Pow hash based upon Colin Percival's Tarnsnap (2009) Modified by Artforz, coblee, pooler, wtogami, Nikolay Belikov, reddink *2fd4d91a0 - John Nash, 2019-12-24 : update copyright year *326828b36 - John Nash, 2019-12-24 : set release state true *8ebede0a6 - John Nash, 2019-12-24 : release notes *36df6fdfb - John Nash, 2019-12-23 : add check explictly for v5 blocks or greater *874dc1f0c - John Nash, 2019-12-17 : remove hardcoded global variable rearrange debug log output *763b25db8 - John Nash, 2019-12-17 : move copyright to new line *536baf635 - John Nash, 2019-12-17 : update version and set release state to false *cde9009f3 - John Nash, 2019-12-17 : update copyright year *ae41b7ed3 - John Nash, 2019-12-17 : set isSuperMajority to 90% for mainnet *e43e1c8ed - John Nash, 2019-12-10 : additional logging to verify isSuperMajority in the debug.log output *e31783cac - John Nash, 2019-12-05 : add/update public key for mainnet *405c6f002 - John Nash, 2019-12-05 : add log output for current inflation rate *9cc43c3f7 - John Nash, 2019-12-02 : determine calculated stake based on posv version *7baa3bf75 - John Nash, 2019-11-25 : check the posv transaction for correct pubkey *9ffa7ca38 - John Nash, 2019-11-21 : check for posv v1 or posv v2 blocks when calculating stake reward *39f7aad68 - John Nash, 2019-11-14 : add logging *0e283e6c3 - John Nash, 2019-11-13 : correct maths *74cbdeffd - John Nash, 2019-11-11 : use new posv v2 functions addidtional logging *35d7413b5 - John Nash, 2019-11-11 : add new proofofstakereward *3d917216c - John Nash, 2019-11-11 : get inflation adjustment *f63d17443 - John Nash, 2019-11-08 : add the developer output split fund output *ca263c9c9 - John Nash, 2019-11-05 : add dev key to chainparams *df6996ab0 - John Nash, 2019-11-05 : add block version checking *14b663479 - John Nash, 2019-11-05 : increase block version
Credits
Thanks to everyone who contributed to coding, testing and feedback for this release, notably:
@cryptognasher @techadept @chris @cryptobuze @harmonyq @mindredder @paxtech @Tiago Peralta 
Stake on!!
-Reddcoin (RDD) Core Development Team
submitted by TechAdept to reddCoin [link] [comments]

AMA/Tutorial: Run a full node on AWS free tier with local LAN storage

AMA/Tutorial: Run a full node on AWS free tier with local LAN storage
This is a tutorial/AMA on how you can be running a full node, in the AWS cloud, for very low cost or even free.
I used to run a node on my local network but there is a problem with this; your public IP is broadcast, and then it gets associated with Bitcoin. Node owners are likely to own Bitcoin, and this raises your personal threat profile, validated against my IDS/IPS logs.
Run a VPN? Many VPNs are automatically blocked, or sketchy. Tor is also blocked on a large portion of the internet. Neither provide you with a real static IP, and that helps out the network.
There is a easy solution to this; run a node on the AWS free tier, and use an elastic IP so you have a static address. Bandwidth is free in, and low cost out, and you can control how much of that you use easily, and control your spent. The problem is that Amazon charges a LOT for online storage and even with a 1MB blocksize, the blockchain is very large and growing steadily! We mitigate this by using a VPN back to your network, where you can store the blockchain on a SMB share.
It is not complicated to do, but there are very many moving pieces to keep track of and configure. In order to fully trust your node, the best way is to build it from scratch. This is my goal in walking you through the process.
There are lots of ways to accomplish this same task; I only want to present one that works, and you can go from there. Once you have access to the blockchain in the cloud for reasonable prices, you can also look at things like the Lightning Network.
This article makes four major assumptions:

  1. That you have a OpenVPN server on your network and know how to configure it. I use pfSense and OpenVPN; others will work just as well, but you'll need to do a little work to figure out the particulars. If you don't know how, do not fret! There are loads of good tutorials for just about every platform. Or ask below. I also limited the user with access to the share at the firewall specifically to the IP hosting the share to lower the threat envelope.
  2. That you have the blockchain downloaded locally and reasonably up to date. If you don't, head on over to bitcoin.org and download it for OSX or Windows or Linux, whatever you use for your workstation. Follow the directions to set up the software and download/synchronize it to the network. This will take awhile! Once you've synchronized, copy the data directory to your SMB share you want the AWS instance to access. You could also synchronize everything directly on AWS too, but it will likely take longer and may cost a bit for the bandwidth.
  3. That you're on windows. OSX and Linux will have slightly different processes to connect to the instance via the terminal and SSH. If you need help, ask, and I am sure we can get you fixed up.
  4. That you've read the excellent bitcoin.org full node tutorial here: https://bitcoin.org/en/full-node

With that, on with the show!
First: Head on over to https://aws.amazon.com/ and make yourself an account.
Once you've set up you'll need to start the process of creating a virtual machine on AWS. Look for this graphic and click on it:

Start by launching a new machine

Follow the rabbit hole, and you'll be looking to create a plain jane Amazon AMI Linux instance. It looks like this:

Pick the basic AMI instance
Keep in mind you want to pick the x86 version, which is the default.

Continue clicking, you'll want to select the t2.micro instance that is eligible for the free tier for new accounts.

Pick the free tier. You can also upgrade to the smaller tier for more ram, but the micro works for now.
Now, you're going to need a way to connect to your soon-to-be-created node in the cloud. Amazon uses SSH keys to do this, so the next step means you're going to make some. You need to save this file, as if you lose it, you won't be able to access your node anymore. Much like your wallet private keys!

Beware losing your keys!

If you've made it this far, you're almost launched!
Now we need to convert the key to a format that we can use to connect to the instance from Windows. I recommend using Putty! https://www.putty.org/ if you don't have it already; if you're on OSX or Linux, you likely have what you need already.
Follow the guide here to get connected: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/putty.html

Next you'll need to set up a opening in the firewall if you want incoming connections. This is done by adding to the security group in the "Network and Security" section; edit it to look like this:

Change the inbound security rules for the instance to accept incoming connections on 8333.

The hard part is over!
Optional: Configuring a static IP. Amazon calls their implementation "elastic" IPs, but it's really a static IP that you can move around between instances very easily. It will ensure your public address on AWS does not change; it isn't required, but it is better if you intend on allowing outgoing connections.
Go back to the main dashboard display.
In "Network and Security", click on "Elastic IPs".
Select Allocate New Address (blue button on top) and then select it in the table. In actions, you will see "Associate Address". Select this then assign the address to the instance you have previously configured. Done!

Next up: Log into your machine, and immediately update everything. Use the IP provided by Amazon, or the Elastic IP if you assigned one to the instance in the last step.
type: "sudo yum update"

Now, let's get the VPN configured.
First step is to install OpenVPN. We need to install the extended package library to do this.
type: "sudo amazon-linux-extras install epel"
type: "sudo yum-config-manager --enable epel"
Now you can install OpenVPN.
type: "sudo yum install openvpn"
You will need your credential file from OpenVPN; it's a file you generate that will have a .ovpn extension. But you're going to need to upload it to the instance. You can do this through the scp command on OSX or Linux, but if you're on Windows, you'll need another utility. Get WinSCP here: https://winscp.net/eng/download.php
But we'll have to tell it where your key file is so you can login. Select "New Session", then use the same IP and username as you did to connect before. We'll need to tell it about the key file though! Select the "Advanced" tab then under the SSH section, click on "Authentication" and then select your private key file you generated in the tutorial above.
Connect and upload the .ovpn file that you generated when you added a user for the VPN. This step depends on your OpenVPN configuration - ask below if you have problems.
Next, let's verify we can connect to the VPN!
type: "openvpn --config my-configuration-file-made-by-openvpn.ovpn &"
You will be prompted for a password if you configured one.
Verify operation by pinging your LAN router, e.g.
type: "ping 192.168.2.1" or the address of the SMB server where you shared the information.

Allllrighty! Next up is getting connected to your blockchain. Create a directory where the data directory will be mounted.
type: "mkdir blockchain"
We need to install samba and some utilities to get things mounted.
type: "sudo yum install samba"
type: "sudo yum install cifs-utils"

Now let's mount the folder:
type: "sudo mount -t cifs //192.168.2.100/Bitcoin ./blockchain -o user=bitcoin,vers=2.0,uid=ec2-user,gid=ec2 user,file_mode=0777,dir_mode=0777"
Where " //192.168.2.100/Bitcoin" is the address of the SMB server and share where you put the data directory from your initial sync. If you didn't, and just want to sync everything from AWS, then make sure it's a folder where your user has access. In this case, I'm assuming you've made a SMB user with the name "Bitcoin". The command will prompt you for the password to access the share. The other bits ensure you can have read and write access to the share once it's mounted in AWS.

Now we're ready for some Bitcoin! Props to the tutorial here: https://hackernoon.com/a-complete-beginners-guide-to-installing-a-bitcoin-full-node-on-linux-2018-edition-cb8e384479ea
But I'll summarize for you:
Download and then re-upload with WinSCP, or download directly to your instance with wget, the most current Bitcoin core. In this case, it's bitcoin-0.18.0-i686-pc-linux-gnu.tar.gz downloaded from https://bitcoin.org/en/bitcoin-core/.
Let's verify it hasn't been tampered with once you have it uploaded to the terminal:
type: "sha256sum bitcoin-0.18.0-i686-pc-linux-gnu.tar.gz"
Then compare that with the hash value that's listed in the SHA256SUMS.asc file on bitcoin.org. In this case, "36ce9ffb375f6ee280df5a86e61038e3c475ab9dee34f6f89ea82b65a264183b" all matches up, so we know nobody has done anything evil or nefarious to the file.
Unzip the file:
type: "tar zxvf bitcoin-0.18.0-i686-pc-linux-gnu.tar.gz"
There is a warning about a symbolic link; everything seems to work OK regardless, but if anyone knows what or how to fix, please comment.
We'll need to get some missing libraries before we can run it; these aren't in the basic AMI instance.
type: "sudo yum install glibc.i686"
type: "yum install libgcc_s.so.1"

FINALLY! We are ready to launch the program. Go to the "bin" directory inside where you unzipped the Bitcoin Core tarball. (e.g. /home/ec2-useblockchain/bitcoin-0.18.0/bin)
./bitcoind -datadir=/home/ec2-useblockchain/data
You will see the program either start to sync and download, or start to read the existing blockchain file that you put in the share from before.

Congrats!

There are a couple extra steps to have it automatically start on reboot, but let's see if anyone gets this far first. I use the "screen" program to do this, but there's also a daemon mode, and some other functionality that is discussed in the hackernoon tutorial.
The primary cost will be outgoing bandwidth. AWS charges $0.10/GB beyond 15GB; You can limit the outgoing bandwidth easily according to your budget: https://bitcoin.org/en/full-node#reduce-traffic

Hope this encourages people to try running a free, or very low cost, cloud node, with a substantially reduced threat profile.
submitted by xtal_00 to Bitcoin [link] [comments]

Dogecoin Daemon on Windows Server?

Hey there, I've got a Windows server and am trying to get a pool going on it, but I'm stuck at the daemon. All the documentation on it only talks about compiling the daemon on linux. Is there a way to get the daemon compiled and running on Windows? Thanks in advance.
submitted by JeremyQ to dogeducation [link] [comments]

⚡ Lightning Network Megathread ⚡

Last updated 2018-01-29
This post is a collaboration with the Bitcoin community to create a one-stop source for Lightning Network information.
There are still questions in the FAQ that are unanswered, if you know the answer and can provide a source please do so!

⚡What is the Lightning Network? ⚡

Explanations:

Image Explanations:

Specifications / White Papers

Videos

Lightning Network Experts on Reddit

  • starkbot - (Elizabeth Stark - Lightning Labs)
  • roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • stile65 - (Alex Akselrod - Lightning Labs)
  • cfromknecht - (Conner Fromknecht - Lightning Labs)
  • RustyReddit - (Rusty Russell - Blockstream)
  • cdecker - (Christian Decker - Blockstream)
  • Dryja - (Tadge Dryja - Digital Currency Initiative)
  • josephpoon - (Joseph Poon)
  • fdrn - (Fabrice Drouin - ACINQ )
  • pmpadiou - (Pierre-Marie Padiou - ACINQ)

Lightning Network Experts on Twitter

  • @starkness - (Elizabeth Stark - Lightning Labs)
  • @roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • @stile65 - (Alex Akselrod - Lightning Labs)
  • @bitconner - (Conner Fromknecht - Lightning Labs)
  • @johanth - (Johan Halseth - Lightning Labs)
  • @bvu - (Bryan Vu - Lightning Labs)
  • @rusty_twit - (Rusty Russell - Blockstream)
  • @snyke - (Christian Decker - Blockstream)
  • @JackMallers - (Jack Mallers - Zap)
  • @tdryja - (Tadge Dryja - Digital Currency Initiative)
  • @jcp - (Joseph Poon)
  • @alexbosworth - (Alex Bosworth - yalls.org)

Medium Posts

Learning Resources

Books

Desktop Interfaces

Web Interfaces

Tutorials and resources

Lightning on Testnet

Lightning Wallets

Place a testnet transaction

Altcoin Trading using Lightning

  • ZigZag - Disclaimer You must trust ZigZag to send to Target Address

Lightning on Mainnet

Warning - Testing should be done on Testnet

Atomic Swaps

Developer Documentation and Resources

Lightning implementations

  • LND - Lightning Network Daemon (Golang)
  • eclair - A Scala implementation of the Lightning Network (Scala)
  • c-lightning - A Lightning Network implementation in C
  • lit - Lightning Network node software (Golang)
  • lightning-onion - Onion Routed Micropayments for the Lightning Network (Golang)
  • lightning-integration - Lightning Integration Testing Framework
  • ptarmigan - C++ BOLT-Compliant Lightning Network Implementation [Incomplete]

Libraries

Lightning Network Visualizers/Explorers

Testnet

Mainnet

Payment Processors

  • BTCPay - Next stable version will include Lightning Network

Community

Slack

IRC

Slack Channel

Discord Channel

Miscellaneous

⚡ Lightning FAQs ⚡

If you can answer please PM me and include source if possible. Feel free to help keep these answers up to date and as brief but correct as possible
Is Lightning Bitcoin?
Yes. You pick a peer and after some setup, create a bitcoin transaction to fund the lightning channel; it’ll then take another transaction to close it and release your funds. You and your peer always hold a bitcoin transaction to get your funds whenever you want: just broadcast to the blockchain like normal. In other words, you and your peer create a shared account, and then use Lightning to securely negotiate who gets how much from that shared account, without waiting for the bitcoin blockchain.
Is the Lightning Network open source?
Yes, Lightning is open source. Anyone can review the code (in the same way as the bitcoin code)
Who owns and controls the Lightning Network?
Similar to the bitcoin network, no one will ever own or control the Lightning Network. The code is open source and free for anyone to download and review. Anyone can run a node and be part of the network.
I’ve heard that Lightning transactions are happening “off-chain”…Does that mean that my bitcoin will be removed from the blockchain?
No, your bitcoin will never leave the blockchain. Instead your bitcoin will be held in a multi-signature address as long as your channel stays open. When the channel is closed; the final transaction will be added to the blockchain. “Off-chain” is not a perfect term, but it is used due to the fact that the transfer of ownership is no longer reflected on the blockchain until the channel is closed.
Do I need a constant connection to run a lightning node?
Not necessarily,
Example: A and B have a channel. 1 BTC each. A sends B 0.5 BTC. B sends back 0.25 BTC. Balance should be A = 0.75, B = 1.25. If A gets disconnected, B can publish the first Tx where the balance was A = 0.5 and B = 1.5. If the node B does in fact attempt to cheat by publishing an old state (such as the A=0.5 and B=1.5 state), this cheat can then be detected on-chain and used to steal the cheaters funds, i.e., A can see the closing transaction, notice it's an old one and grab all funds in the channel (A=2, B=0). The time that A has in order to react to the cheating counterparty is given by the CheckLockTimeVerify (CLTV) in the cheating transaction, which is adjustable. So if A foresees that it'll be able to check in about once every 24 hours it'll require that the CLTV is at least that large, if it's once a week then that's fine too. You definitely do not need to be online and watching the chain 24/7, just make sure to check in once in a while before the CLTV expires. Alternatively you can outsource the watch duties, in order to keep the CLTV timeouts low. This can be achieved both with trusted third parties or untrusted ones (watchtowers). In the case of a unilateral close, e.g., you just go offline and never come back, the other endpoint will have to wait for that timeout to expire to get its funds back. So peers might not accept channels with extremely high CLTV timeouts. -- Source
What Are Lightning’s Advantages?
Tiny payments are possible: since fees are proportional to the payment amount, you can pay a fraction of a cent; accounting is even done in thousandths of a satoshi. Payments are settled instantly: the money is sent in the time it takes to cross the network to your destination and back, typically a fraction of a second.
Does Lightning require Segregated Witness?
Yes, but not in theory. You could make a poorer lightning network without it, which has higher risks when establishing channels (you might have to wait a month if things go wrong!), has limited channel lifetime, longer minimum payment expiry times on each hop, is less efficient and has less robust outsourcing. The entire spec as written today assumes segregated witness, as it solves all these problems.
Can I Send Funds From Lightning to a Normal Bitcoin Address?
No, for now. For the first version of the protocol, if you wanted to send a normal bitcoin transaction using your channel, you have to close it, send the funds, then reopen the channel (3 transactions). In future versions, you and your peer would agree to spend out of your lightning channel funds just like a normal bitcoin payment, allowing you to use your lightning wallet like a normal bitcoin wallet.
Can I Make Money Running a Lightning Node?
Not really. Anyone can set up a node, and so it’s a race to the bottom on fees. In practice, we may see the network use a nominal fee and not change very much, which only provides an incremental incentive to route on a node you’re going to use yourself, and not enough to run one merely for fees. Having clients use criteria other than fees (e.g. randomness, diversity) in route selection will also help this.
What is the release date for Lightning on Mainnet?
Lightning is already being tested on the Mainnet Twitter Link but as for a specific date, Jameson Lopp says it best
Would there be any KYC/AML issues with certain nodes?
Nope, because there is no custody ever involved. It's just like forwarding packets. -- Source
What is the delay time for the recipient of a transaction receiving confirmation?
Furthermore, the Lightning Network scales not with the transaction throughput of the underlying blockchain, but with modern data processing and latency limits - payments can be made nearly as quickly as packets can be sent. -- Source
How does the lightning network prevent centralization?
Bitcoin Stack Exchange Answer
What are Channel Factories and how do they work?
Bitcoin Stack Exchange Answer
How does the Lightning network work in simple terms?
Bitcoin Stack Exchange Answer
How are paths found in Lightning Network?
Bitcoin Stack Exchange Answer
How would the lightning network work between exchanges?
Each exchange will get to decide and need to implement the software into their system, but some ideas have been outlined here: Google Doc - Lightning Exchanges
Note that by virtue of the usual benefits of cost-less, instantaneous transactions, lightning will make arbitrage between exchanges much more efficient and thus lead to consistent pricing across exchange that adopt it. -- Source
How do lightning nodes find other lightning nodes?
Stack Exchange Answer
Does every user need to store the state of the complete Lightning Network?
According to Rusty's calculations we should be able to store 1 million nodes in about 100 MB, so that should work even for mobile phones. Beyond that we have some proposals ready to lighten the load on endpoints, but we'll cross that bridge when we get there. -- Source
Would I need to download the complete state every time I open the App and make a payment?
No you'd remember the information from the last time you started the app and only sync the differences. This is not yet implemented, but it shouldn't be too hard to get a preliminary protocol working if that turns out to be a problem. -- Source
What needs to happen for the Lightning Network to be deployed and what can I do as a user to help?
Lightning is based on participants in the network running lightning node software that enables them to interact with other nodes. This does not require being a full bitcoin node, but you will have to run "lnd", "eclair", or one of the other node softwares listed above.
All lightning wallets have node software integrated into them, because that is necessary to create payment channels and conduct payments on the network, but you can also intentionally run lnd or similar for public benefit - e.g. you can hold open payment channels or channels with higher volume, than you need for your own transactions. You would be compensated in modest fees by those who transact across your node with multi-hop payments. -- Source
Is there anyway for someone who isn't a developer to meaningfully contribute?
Sure, you can help write up educational material. You can learn and read more about the tech at http://dev.lightning.community/resources. You can test the various desktop and mobile apps out there (Lightning Desktop, Zap, Eclair apps). -- Source
Do I need to be a miner to be a Lightning Network node?
No -- Source
Do I need to run a full Bitcoin node to run a lightning node?
lit doesn't depend on having your own full node -- it automatically connects to full nodes on the network. -- Source
LND uses a light client mode, so it doesn't require a full node. The name of the light client it uses is called neutrino
How does the lightning network stop "Cheating" (Someone broadcasting an old transaction)?
Upon opening a channel, the two endpoints first agree on a reserve value, below which the channel balance may not drop. This is to make sure that both endpoints always have some skin in the game as rustyreddit puts it :-)
For a cheat to become worth it, the opponent has to be absolutely sure that you cannot retaliate against him during the timeout. So he has to make sure you never ever get network connectivity during that time. Having someone else also watching for channel closures and notifying you, or releasing a canned retaliation, makes this even harder for the attacker. This is because if he misjudged you being truly offline you can retaliate by grabbing all of its funds. Spotty connections, DDoS, and similar will not provide the attacker the necessary guarantees to make cheating worthwhile. Any form of uncertainty about your online status acts as a deterrent to the other endpoint. -- Source
How many times would someone need to open and close their lightning channels?
You typically want to have more than one channel open at any given time for redundancy's sake. And we imagine open and close will probably be automated for the most part. In fact we already have a feature in LND called autopilot that can automatically open channels for a user.
Frequency will depend whether the funds are needed on-chain or more useful on LN. -- Source
Will the lightning network reduce BTC Liquidity due to "locking-up" funds in channels?
Stack Exchange Answer
Can the Lightning Network work on any other cryptocurrency? How?
Stack Exchange Answer
When setting up a Lightning Network Node are fees set for the entire node, or each channel when opened?
You don't really set up a "node" in the sense that anyone with more than one channel can automatically be a node and route payments. Fees on LN can be set by the node, and can change dynamically on the network. -- Source
Can Lightning routing fees be changed dynamically, without closing channels?
Yes but it has to be implemented in the Lightning software being used. -- Source
How can you make sure that there will be routes with large enough balances to handle transactions?
You won't have to do anything. With autopilot enabled, it'll automatically open and close channels based on the availability of the network. -- Source
How does the Lightning Network stop flooding nodes (DDoS) with micro transactions? Is this even an issue?
Stack Exchange Answer

Unanswered Questions

How do on-chain fees work when opening and closing channels? Who pays the fee?
How does the Lightning Network work for mobile users?
What are the best practices for securing a lightning node?
What is a lightning "hub"?
How does lightning handle cross chain (Atomic) swaps?

Special Thanks and Notes

  • Many links found from awesome-lightning-network github
  • Everyone who submitted a question or concern!
  • I'm continuing to format for an easier Mobile experience!
submitted by codedaway to Bitcoin [link] [comments]

All Usernames

Popularity Number Tried Usernames
1 root
2 admin
3 guest
4 supervisor
5 Administrator
6 user
7 tech
8 ubnt
9 default
10 support
11 service
12 888888
13 admin1
14 mother
15 666666
16 test
17 oracle
18 ftpuser
19 usuario
20 test1
21 test2
22 123456
23 test123
24 123
25 321
26 password
27 [email protected]
28 postgres
29 dev
30 testuser
31 tomcat
32 git
33 dspace
34 nexus
35 zabbix
36 teamspeak
37 ftpuser1
38 ubuntu
39 ts3
40 www-data
41 ldapuser1
42 minecraft
43 ghost
44 butter
45 redis
46 ts
47 teamspeak3
48 hadoop
49 tonyeadmin
50 pi
51 odoo
52 mysql
53 contador
54 cron
55 wp
56 ftp
57 weblogic
58 backup
59 ftp_user
60 ts3bot
61 1234
62 bin
63 student
64 user1
65 tom
66 ts3server
67 nagios
68 duni
69 test321
70 e8ehome
71 telecomadmin
72 db2fenc1
73 bitcoin
74 a
75 deploy
76 nginx
77 db2inst1
78 hdfs
79 abc123
80 jenkins
81 web1
82 dasusr1
83 operator
84 anonymous
85 csgo
86 camera
87 passw0rd
88 baikal
89 tplink
90 cssserver
91 tt
92 admins
93 tst
94 osmc
95 prueba
96 fulgercsmode123
97 y
98 odoo9
99 zookeeper
100 mahdi
101 wordpress
102 www
103 billing
104 111111
105 ftp_test
106 flw
107 b
108 redhat
109 steam
110 ohh
111 ops
112 abc123456
113 user8
114 ScryptingTh3cod3r~F
115 ts3user
116 centos
117 svn
118 user9
119 postgres123
120 vagrant
121 gituser
122 enable
123 elastic
124 user2
125 daemon
126 user3
127 walter
128 VM
129 havanaloca
130 csgoserver
131 demo
132 CUAdmin
133 servercsgo
134 css
135 spark
136 ftptest
137 data
138 localadmin
139 wangjc
140 ispadmin
141 1
142 adam
143 Accept-Language: zh-CN,zh;q=0.8
144 web
145 client
146 xuelp123
147 workpress
148 openssh-portable-com
149 cacti
150 zs
151 cubie
152 informix
153 Contact:
154 conf
155 hbase
156 ranger
157 msn
158 bot
159 spark1
160 radio
161 xc3511
162 pass
163 dev123
164 maven-assest
165 noah
166 linktechs
167 query
168 bot1
169 informix123
170 gzw
171 tss
172 NETBASE
173 es
174 oracle123
175 user123
176 mcserver
177 ftpadmin
178 linuxshell
179 app
180 optiproerp
181 wangshaojie
182 knox
183 org
184 nmstest
185 elasearch
186 Xinjiang
187 aticara
188 555
189 [email protected]
190 wwwdata
191 sh
192 jenkins123
193 henry
194 licongcong
195 crontab
196 oldbody
197 tez
198 122.152.213.96
199 zhang
200 Shaanxi
201 nobody
202 cf46e3bdb4b929f1
203 ethereum
204 aa
205 Jay123
206 ionhasbeenidle13hr
207 mysql-data
208 system
209 localhost
210 [email protected]
211 dzldblog
212 linuxprobe
213 bdos
214 raid
215 jira
216 zhouh
217 amx
218 wanjm
219 MPE
220 aaa
221 NISECTC5002
222 ec2-user
223 sandiego
224 iptv
225 shell
226 confluence
227 matthew
228 bizf
229 backupdb
230 hive
231 dell
232 tornado
233 zhou
234 blender
235 user0
236 c
237 @Huawei123
238 net
239 cat1
240 watch 'sh'
241 haohuoyanxuan
242 administrador
243 text
244 dell123
245 wybiftp
246 share
247 yanss
248 squid
249 kafka
250 db2as
251 PRODDTA
252 bitcoinj
253 user01
254 cc
255 [email protected]
256 12345
257 azureadmin
258 duanhw
259
260 zhangfei
261 easton
262 geoeast
263 lwx
264 ldd
265 aws
266 gv1
267 140.115.53.10
268 useradmin
269 tlah
270 walletjs
271 ccc
272 user4
273 solr
274 chef
275 python
276 GET / HTTP/1.0
277 12345678
278 customer
279 sss
280 geminiblue
281 ausftp
282 Chongqing
283 nologin
284 username
285 mining
286 user11
287 news
288 2
289 muiehack9999
290 user5
291 ubuntu123
292 docker
293 nexxadmin
294 wq
295 OPTIONS / HTTP/1.0
296 gpadmin
297 test5
298 kuangwh
299 nagios123
300 ams
301 gfs1
302 vsb_pgsql
303 140.238.189.155
304 carl
305 CONNECT ip.ws.126.net:443 HTTP/1.1
306 nvidia
307 wallet
308 [email protected]
309 3
310 db2fenc1123
311 user6
312 www1
313 andy
314 assest
315 OPTIONS / RTSP/1.0
316 azure
317 webftp
318 tab3
319 aliyun
320 smartworldmss
321 hcat
322 walle
323 zhangfeng
324 openlgtv
325 User-Agent: Go-http-client/1.1
326 wangw
327 kelly
328 usuario1
329 [email protected]#
330 x
331 Huawei1234
332 user7
333 sysadmin
334 video
335 tmp
336 GET /nice%20ports%2C/Tri%6Eity.txt%2ebak HTTP/1.0
337 dianzhong
338 clfs
339 wangk123
340 rsync
341 livy
342 xuezw
343 hduser
344 testing
345 HEAD http://123.125.114.144/ HTTP/1.1
346 bitcoind
347 matrix
348 cassandra
349 xx
350 F
351 backups
352 ktuser
353 barbara
354 sunxinming
355 OPTIONS sip:nm SIP/2.0
356 ftpuser123
357 michael
358 jiang
359 wangh
360 wolf
361 ikan
362 122.88.49.75
363 monitor
364 Proxy-Authorization: Basic Og==
365 pentaho
366 rootadmin123
367 wildfly
368 xxx
369 nobodymuiefazan123456
370
371 www2
372 serial#
373 From: ;tag=root
374 cat2
375 alice
376 robot
377 wowza
378 visitor
379 tab2
380 elasticsearch
381 gbase
382 motorola
383 superuser
384 User-Agent: Mozilla/5.01688858 Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/62.0.3202.75 Safari/537.36
385 sara
386 Jaydell123
387 linuxacademy
388 vps
389 xbmc
390 software
391 Call-ID: 50000
392 felix
393 portal
394 backupdb140
395 bdos123
396 greenplum
397 sshd
398 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,/;q=0.8
399 daemond
400 qwe123
401 webmaster
402 [email protected]#
403 web13
404 bpadmin
405 ligh
406 leo
407 Max-Forwards: 70
408 password123
409 vivacom
410 dbvisa
411 tab
412 mongo
413 ggg
submitted by Admir4l88 to Admir4l88Data [link] [comments]

My first experience using Lightning Network

I figured it was time to see for myself just how easy or difficult it was to use LN, and no better opportunity than to troll satoshis.place with some memes. I figured if there was a light wallet (Eclair) for android, there'd be something similar for Windows or even Linux to patch through Electrum. Well, after some research, there isn't, at least that I can find. If you want to use LN on desktop, you need a full client which means you need a full Bitcoin Core node.
And apparently, if you want LN to work somewhat decently at all, you need a full client, because out of 100 or more tries to push to satoshis.place payment requests on Eclair for android, only a handful succeeded, as connection to the channel is constantly dropping off an on multiple times a minute, even with a channel opened directly to them.
So I thought I'd try the other mobile LN wallet "Bitcoin Lightning Wallet". After funding it and opening a channel with a large hub, I thought I'd be able to route straight to satoshis.place. Unfortunately no, it appears you have to open a channel directly with who you want to transact with on this one as well, and it won't even let me open a channel with SP because "Data loss protection is not provided by this peer".
Needless to say, it's pretty ridiculous in order just to have some fun on this stupid website, I'd have to spin up a Linux box, install a full Bitcoin Core wallet (yay, let me sync for a few days), then install a full LN Daemon on top if it which I'll need to keep online for as long as I have a channel open.
The user experience is no where near at the point of SPV Bitcoin wallets, it barely works at all on the "easy methods".
submitted by lechango to btc [link] [comments]

MoneroV (XMV) | World's Most Private Cryptocurrency

MoneroV (XMV) | World's Most Private Cryptocurrency

MoneroV (XMV) | World's Most Private Cryptocurrency
MoneroV (XMV)
Website : www.monerov.online
MoneroV (XMV) is a private, untraceable, finite and secure cryptocurrency fork of the Monero (XMR) blockchain. MoneroV fulfills the long overdue desire for a truly anonymous, decentralized, finite peer-to-peer electronic currency. Individuals and businesses can transact securely, reliably and anonymously with low fees using MoneroV.
MoneroV is truly anonymous and private. Sending and receiving addresses are obfuscated, as well as all amounts being transferred in all transactions. Your identity cannot be linked or traced to a transaction on the MoneroV blockchain.
Roadmap Paper: https://monerov.online/MoneroV-Roadmap.pdf
Features:Capped: MoneroV adheres to core Austrian school of economics principles by capping the total MoneroV coins that can be created, parting with Monero’s infinite coin supply structure.Secure: Decentralized peer-to-peer blockchain transaction consensus enables MoneroV to be secure and reliable.Private: MoneroV is truly anonymous and private. Sending and receiving addresses are obfuscated, as well as all amounts being transferred in all transactions. Your identity cannot be linked or traced to a transaction on the MoneroV blockchain.
How can I get MoneroV?The only way to obtain XMV is by Trade (buy/sell) at supporting exchange. MoneroV is now listed on Coin Market Cap. You can See the leading exchanges by xmv volume on CMC here.
How MoneroV is different from Monero?MoneroV has a limited supply of coins (27 Million Max) in contrast to Monero’s infinite coin supply. MoneroV will have an active development fund that would be used for rapid development and feature integration versus Monero's voluntary donation based development process. In addition, MoneroV will implement new protocols that will solve the scaling problems facing Monero and other cryptocurrencies such as Bitcoin.
When will the MoneroV wallet be released?The official MoneroV windows wallet is out, in addition to other dependencies such as the MoneroV daemon is released. Macos wallet, Macos and linux miner, Web wallet is in development will be released.
How can I join the MoneroV development team?Anyone can join the MoneroV open source project. We are looking for talented C++ & Node.js developers as well as front-end developers and DevOps engineers.
Additional info is available on our blog:https://blog.monerov.online/
Supply & Emission:
https://preview.redd.it/kc0jxkkdx7641.png?width=1122&format=png&auto=webp&s=1d843b63e172858c1d8cadb683e7f81626b183e1
Specifications Consensus Mechanism: Proof-of-Work Genesis Date: December 16th, 2019 Block Time: 1 minute Max Supply - Capped at 27 Million XMV. Avaliable supply - Current coins supply (total emission) Block Reward: Maximum of 9 XMV per block at the mainnet start and smooth decrease until 27 million max supply will be reached. Proof of Work - Cuckarood29v (based on Cuckoo and CryptoNote) . Difficulty Retarget - Every block. Block Time - Every 1 minutes. Block Size - Dynamic. Privacy - Ring signature / stealth addresses.
Official Pool:https://pool.monerov.online/
Pool Lists:https://moneroocean.stream/https://xmv.leafpool.com/https://baikalmine.com/en/pplns/xmv
Coin Marketcaphttps://www.coingecko.com/en/coins/monerov
Exchangeshttps://tradeogre.com/exchange/BTC-XMV
Official Website:https://monerov.online
Blockchain Explorer:https://explorer.monerov.online/
RandomV Miner:https://github.com/xmvdev/xmrig/releases/latest
Github (Repository roll-out):https://github.com/xmvdev/
Paper Wallet:https://pool.monerov.online/#paperwallet
Telegram:https://t.me/monerovofficial
Reddit:https://www.reddit.com/usemonerovofficial/
Twitter (Community):https://twitter.com/monerovofficial
Team contact:[email protected]
submitted by monerovofficial to u/monerovofficial [link] [comments]

A Good Pentesting Tools List

Collection of pentesting tools by BrainfuckSec

Anti Forensics Tools
Exploitation Tools
Forensics Tools
Information Gathering
Keyloggers
Maintaining Access
Password Attacks
Reverse Engineering
Sniffing Spoofing
Social Engineering
Vulnerability Analysis
Web Applications
Web Shells
Wireless Attacks
submitted by _brainfuck to Pentesting [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

(Upvote to the top) > SOLUTION FOR ZCLASSIC Eleos Wallet: "Wallet daemon can not be run. Check if daemon does not already run"

So I noticed a lot of people recently (including myself) are experiencing the error "Wallet daemon can not be run. Check if daemon does not already run" when trying to open up their ZCL Eleos wallet, and people are unable to access their funds or cannot export their private keys as well. A solution to this is now official (thanks to JBrutWhat from the BTCP team for helping me out on this.) Note: Post is being edited as more info becomes available to me.
This solution also works for users who are on the ZClassic Swing wallet experiencing the error "A general unexpected critical error has occurred: error: Couldn't connect to server, see the console output for more detailed error information!."
Eleos Wallet Troubleshooting section
ZClassic Electrum Wallet
  1. Create a new standard wallet and restore the 2FA wallet using your "seed" codes. DO NOT password protect this wallet.
  2. Disable the 2FA feature when presented with the option.
  3. Navigate to C:/Users/YOUR-NAME/AppData/Roaming/Electrum-zcl/wallets. Open the new standard wallet file with Notepad.
  4. You will need to gather the 2 private keys and one public key. To find this easily, press “CTRL+F” and search for “xprv”. Copy the 2 “xprv” values as well as the last “xpub” value. You will need these in a later step.
  5. Create a new “Multi-signature wallet”. Select “From 3 co-signers” on the first slider. Select “Require 2 signatures” on the second slider.
  6. To add the first co-signer, click “Use public or private keys”. Enter the first xprv key in this box.
  7. Add the second co-signer via a private key also.
  8. Add the third co-signer with the public key. Complete the set-up.
  9. Your wallet funds now have the ability to be sent from the multi-signature wallet.
For Users who were already using the Electrum wallet beforehand, you can go to file > new/restore wallet > next > import zclassic private keys and input the private key you obtained from the walletaid tool, and it should import the wallet into the electrum wallet. Then from there, go to file > backup wallet and export a copy of the wallet.dat file onto an offline USB.
Reminder: Backup and delete the private keys file from your desktop pc/hard drive, move it into an offline USB for safekeeping. Do not leave it on an online device.
Donate to me if you found the guide useful! Your donations 100% voluntary but they are greatly appreciated and keep us going!
ZCL: t1fkxCWJs3f2oXznGwZuEgftJ2SCjYZ8VjZ
BTC: 14Xmfm9jf4h1h4RXZBQCFK6i4LWibqWVPu
LTC: LhAERgWcjbbXQbGqjhy4owALGhwfpj1aw2
ETH: 0xe723305337926e1fcb5dd0495e6648569a252c13
BCH: 1JXqLHqjYH8bew38AXwEt9dmKvsdYwLtvr
LINKS
(You can join the discord rooms where there are channels for users looking for help)
submitted by BestServerNA to ZClassic [link] [comments]

Daemon Tools Ultra 5.8.0 free 2020  Windows 7/8/10 32-64 ... ✅ DESCARGAR DAEMON TOOLS PRO 2020 ULTIMA VERSION CON LICENCIA DE POR VIDA! 32&64 BITS WINDOWS 7/8/10 Como Descargar Daemon Tools ite Full español  2018 ... DESCARGAR Daemon Tools Ultra 5 [Ultima Version] GRATIS ... Masari Daemon and Wallet Tutorial

Windows Start automatically . To configure the Bitcoin client to start automatically: You might use the configuration-file, or the GUI-Settings: Settings -> Options then mark the checkbox titled: [X] Start Bitcoin on system startup Batch automation . To work with batch, you have to start the daemon (bitcoind.exe). The bitcoin.exe run with option "-server" will respond with GUI-messages you are ... Bitcoin mining software monitors this input and output of your miner while also displaying statistics such as the speed of your miner, hashrate, fa. trending; Bitcoin Mining Software Windows 7 32 Bit Cryptocurrency . Bitcoin Mining Software Windows 7 32 Bit . May 7, 2018 DTN Staff. twitter. pinterest. google plus. facebook. 11 Best Bitcoin Mining Software For Mac, Windows, Linux ... The first step is finding the default data directory. Mac, Windows, and Linux version of Bitcoin Core each store data in a different location. The procedure described here will use a graphical file browser to find it. On Windows 7, begin by clicking on the Windows menu. Then click your username from the right-hand menu. Windows Explorer should ... Bitcoin Core daemon running on a Windows 7 seems to be not supported with the following error: C:\Users\User1>bitcoind -daemon Error: -daemon is not supported on this operating system Bitcoind – a daemon program that implements the Bitcoin protocol, is controlled through the command line. It is one of the main components of the Bitcoin network node software. Bitcoin software exists in two forms: a GUI application and a background application (daemon on Unix, service on Windows). Programs can be remotely controlled using the JSON-RPC protocol , the corresponding classes ...

[index] [47520] [24263] [9125] [36192] [31632] [3854] [3950] [9908] [48709] [45230]

Daemon Tools Ultra 5.8.0 free 2020 Windows 7/8/10 32-64 ...

Hola amigos de YouTube, en este vídeo aprenderan a descargar DAEMON TOOLS ULTRA v5.0.0.0540. El mejor programa para montar imagenes ISO. Espero les guste el ... DESCARGAR daemon tools GRATIS 2020 Windows 10/7/8/8.1 - En español Link: https://www.daemon-tools.cc/spa/downloads Hola amigos de Youtube en este video les estare enseñando a Como Descargar Daemon Tools Lite Full español 2018 Windows 7/8/10 32 y 64 BITS espero que est... Daemon Tools Ultra 5.8.0 free 2020 Windows 7/8/10 32-64 bits http://www.mediafire.com/file/p8b5hc1euuqsbvm/DAEMON+Tools+Ultra+5.8.0+full+version+(1).rar/f... In this video we learn how to download the Masari Daemon software so we can create, restore, and use an Masari Wallet. Contact Information: http://labbinarym...

#